Nextbase Series 2 OBD Power Cable for Dash Cams | NBDVRS20BD

Product Description

Plug-and-play permanent power for your dash cam - no fuse box, no wiring

Hardwiring a dash cam usually means fishing cables into the fuse box. This Nextbase OBD power cable skips all of that: it plugs straight into your car's OBD-II diagnostic port and gives the camera a permanent live feed. That means Parking Mode keeps watching over the car after you've walked away, and built-in low-voltage protection cuts the supply before your battery runs flat.

Genuinely plug and play
Push the connector into the vehicle's OBD-II port and route the cable to the camera - no fuses to pull, no splicing, no auto-electrician.

Keeps Parking Mode alive
A permanent live connection means the dash cam still has power with the ignition off, so Parking Mode can record impacts and attempted break-ins while the car is unattended.

Built-in low battery protection
The cable cuts power at 11.0 V on a 12 V system (23.0 V on 24 V), so it stops drawing before your starter battery is compromised.

LED power indicator
An indicator on the connector shows at a glance that power is established and the camera is drawing from the OBD port.

Tidy 90-degree connector
The angled connector sits flush against the OBD socket so the cable runs cleanly up the A-pillar instead of hanging into the footwell.

Features

• Plugs directly into the vehicle OBD-II port - no fuse-box hardwiring
• Permanent live feed enables dash cam Parking Mode
• Low-voltage cut-off at 11.0 V (12 V) / 23.0 V (24 V) protects the battery
• LED indicator confirms power is connected
• 90-degree connector for tidy cable routing
• Ferrite core fitted to suppress interference
• Compatible with Nextbase Series 2 dash cams

Specifications

Model
NBDVRS2OBD
Type
OBD-II hardwire / permanent power cable
Vehicle Connection
OBD-II diagnostic port, 90-degree connector
Output
5 V DC to dash cam
Cable Length
5 m (196 in) - verify against retail box
Low Voltage Cut-off
11.0 V DC (12 V battery) / 23.0 V DC (24 V battery)
Power Indicator
LED on connector (flashing or solid = power established)
Interference Suppression
Ferrite core fitted
Parking Mode
Supported - must be enabled in the dash cam settings
Compatibility
Nextbase Series 2 dash cams (not compatible with iQ)
Colour
Black

Package Contents
Nextbase OBD power cable x1